How to Use the Remote Start in a Nissan Altima

Imagine starting your Nissan Altima from the comfort of your home, office, or anywhere else. Our article introduces you to the world of remote start, providing a quick overview of its benefits and the steps to get started.

Note: The Nissan Altima has a remote start feature in model years 2013+.

Contents

2019 – 2023 Models

  1. Press the lock button on the remote key fob to lock the doors.
  2. Within five seconds of locking the doors, press and hold the remote start button (usually indicated by a circular arrow) for a few seconds until the vehicle’s lights flash or the horn beeps, indicating that the engine has started.
  3. The engine will continue to run for about 10 minutes. The climate control system will activate during this time to maintain the previous settings.
  4. To turn off the engine while it’s running press the remote start button again.

2013 – 2018 Models

  1. Press the lock button on the remote key fob to lock the doors.
  2. Press and release the remote start button 2x within five seconds of locking the doors. 
  3. The vehicle’s lights will flash, or the horn will beep to confirm that the engine has started.
  4. The engine will run for a predetermined time (usually 10 minutes) with the climate control system activated.
  5. To turn off the engine while it’s running, press the remote start button again.

NOTE: After using remote start twice in a row, you will need to cycle the ignition switch from on to off before you can use remote start again.

FAQS

How do I start driving after using the remote start?

  1. Apply the brake pedal.
  2. Press the ignition switch to start driving.

Can I extend the remote engine run time?

To extend the engine run time by another 10 minutes, follow these steps;

  1. Press the lock button on the key fob again.
  2. Within five seconds, press and hold the engine start button on the key fob for at least two seconds.
  3. The first 10-minute run time begins with the initial remote start.
  4. The 10-minute extension starts immediately after the first 10 minutes if applied. For example, if you extend the remote start after 5 minutes of initial run time, the engine will run for a total of 15 minutes.

How do you cancel the remote start?

  1. At any point during the remote start, you can cancel it by pressing the remote start button on the key fob.
  2. The parking lights will turn off, indicating the cancellation.

Was this helpful?

Thanks for your feedback!

Leave a Comment