PT cruisers have oil light notifications to notify drivers that they must change the engine oil. As you drive your car, the engine may be contaminated or leak to inadequate levels. Failure to change or refill the oil can lead to the engine malfunctioning. The engine light notification ensures things don’t get to these extreme levels.
However, the oil change notification may still appear even after changing the oil and performing other related maintenance services. The solution to this is to reset the oil change notification using the simple steps highlighted here:
2001 – 2010 Models
- Turn the ignition to position one and close all the doors.
- On the display, press the system selection button until you select the “trip” option in the menu.
- Find the “KM” option by pressing the selection button.
- Press and hold the accept phone call button for a second, then press and hold the OK button for 5 seconds.
- Scroll to highlight the “ASSYST PLUS” and then “oil light reset.”
- Press the OK button to confirm your choice and reset the oil light notification.
- Press the “back” button to exit the menu options.
- Turn the engine off, then turn it back on to confirm the oil light notification has been reset.
Common Symptoms Related to Engine Oil Lights
You shouldn’t see the change oil light notification if your engine oil meets the required standards. The light only comes on if:
- Your car needs an oil change
- Low-level oil
- Contaminated oil
- Overheated oil
- Low oil pressure
Stop and check your oil immediately after the oil light notification comes on. If everything is set, but the light still appears, resetting it using the steps provided is your best option. Contact your dealer if the problem persists.
