When it is time to reset the oil light on the Jeep Cherokee, you will be notified by a Chime, a Warning Light and in some models, OIL CHANGE REQUIRED will appear within the instrument cluster/Dashboard each time you start your vehicle and until the light is properly reset. Follow one of the following set of instructions to Reset your Oil Light:
No more purchasing high-cost key fobs from the dealership as those days are gone thanks to this awesome new innovated trick which enables you to reprogram your own Key Fob/Remote in a matter of minutes. This can also be executed the same way for most Ford models with either 3 or 4 buttons on the remote. Begin with all doors closed and feet off of the brake and accelerator, perform the following short steps:
Dodge RAMs are equipped with a TPMS (Tire Pressure Monitoring System) to assist you in maintaining the correct tire pressure. The warning low-pressure indicator light which appears within your dashboard or via the EVIC, indicated by a chime, should turn off automatically after your tires receive the proper amount of air pressure/ PSI. The EVIC even indicates which tire has low pressure. You can locate the manufacturer’s recommended tire pressure on the inside of the driver’s door. Keep in mind, tire pressure does, in fact, change in different weather conditions, therefore, you should ask your mechanic or dealer about the levels for dissimilar temperatures. Lastly, if you constantly see this warning despite confirming proper pressure in all 4 tires plus your spare (Yes, there is a sensor there as well); Here are steps to follow to disable the warning light:
Cruise control is a cool way to put your vehicle on autopilot so to speak. In this setting, the vehicle can maintain speeds of 25mph or more without having to press the accelerator. However, it will not set at below 25mph. In addition, the feature disconnects when the brake is applied. Albeit this is a wonderful feature, be aware that cruise control can be dangerous on winding roads, in traffic, and on wet slippery or icy roads. With that being said, here are the steps to follow to set your Cruise Control.
Learn how to reset the oil light, “Maintenance Minder” or “Service Due Now” notification on the Nissan Rogue with these steps.
If your Toyota RAV4 is stuck in snow or mud, you may need to disable the TRAC/VSC/Trailer Sway Control systems so that all wheels spin at the same rate. You can turn off this system with these steps.
The “Maintenance Required” oil light will illuminate every 5,000 miles to remind you that you need to change the oil in your Toyota RAV4. Once serviced, you can reset the light using these steps.
Pairing your phone with Bluetooth in your Chevy Cruze is a modern-day safety action, as this allows one to communicate via calls, access call lists and send text messages all hands free, eliminating distractions whilst driving. Here are the steps to follow to help you set up this magnificent feature.
We all experience the unknown reason of flashing dashboard lights. Is the oil light on your Ford Transit lit and you want to reset it? No worries, allow us to help you successfully remove this particular one for you. Follow each step below to reset your oil light indicator:
Is your oil change indicator light on your Volkswagen Jetta annoying or worrying you? Do not fret, with a few simple steps we will have the light cleared in a jiffy! Just implement the following
actions, step by step.
Resetting the Oil Change Light in the Mercedes-Benz C250 and other models should faithfully occur after each oil change as this allows the system to satisfactorily proceed with tracking exactly when the next oil change is needed. [Read more…]
The Keyless Entry system on the Ford F-150 allows for a code to be entered on a numerical pad on the door to enter the vehicle. Every Ford F-150 has a factory key that is used for this Keyless Entry system. If you need this code, use these steps to obtain it.