All models of cars and light trucks are required to be equipped with a tire pressure sensor system. The system monitors the pressure within each tire to alert the driver when the pressure is below the recommended inflation pressure.
It is important to reset the sensors after replacing your tires or inflating them to be updated when any tire pressure changes occur. We will guide you on resetting your sensors for the optimal function of the TPMS on your Mercedes C230.
Contents
2000 – 2007 Models
- Inflate all your car tires following the specification on the tire placard.
- With the engine in the off position, turn the ignition on.
- On the left side of the steering wheel, press the home button to bring up the Menu.
- Still, on the left side of the steering wheel, press the down arrow key to move down the menu to the Service Menu.
- Select the service menu using the ok button on your steering wheel.
- Press the down button to the option of Tire Pressure on the screen.
- Press ok to select.
- Visually identify that the values displayed on the screen are the same values you put in your tires while inflating them earlier.
- If the figures align with your tire pressure, press the down button one more time, then press the ok button to return to the main menu.
Was this helpful?
Thanks for your feedback!