After changing the oil in the Mazda CX-5, the “Oil Change” light may need to be reset. Use these steps to clear the notification light so that it will remind you to change the oil at the appropriate time.
- Turn the ignition completely off.
- Press and hold the small knob on the instrument panel.
- Continue holding the knob while turning the ignition to the “ON” position.
- Still continue to hold the knob for about 5 seconds until the warning light blinks.
Release the knob, and the “Oil Change” light on the Mazda CX-5 should no longer be illuminated. You may need to retry these steps if it didn’t work for you.
Did these steps help you? Let me know in the Comments section.
Keith says
Didn’t work for me. I have a 2016 Mazda CX5.
Len says
Hi Keith I have a 2016 2.2 sport and worked perfectly but you have to press start button twice and the ! Mark flashes the release button.
Timothy Birkin says
worked for me on my 2017 cx5.
Bo says
Perfect! CX-5 MY 2017. It worked.
Pamela Young says
It would be nice to know which knob. Some indication where to look for it.
Armando says
I have a Mazsa.Cx-5.2019 and the instructions above did not work.
John says
For my cx5 2018 to get rid of the overdue service notification I had to go to applications then vehicle status monitor.
JJ says
Directions don’t work. John is correct. You need to go to applications from home screen and reset or turn off there. I have 2019 CX5