How to Reset Oil Change Life on the Jeep Wrangler

The Jeep Wrangler will display an “Oil Change Required” message when the vehicle is due for maintenance. Once the service is complete, you can perform an oil reset using these steps.

Contents

2018 – 2023 Models with Instrument Cluster Display

  1. With the engine off, turn the ignition switch to “On” without starting the engine.
  2. Use the buttons on the steering wheel to select “OK“, then use the arrows to toggle the selection to “Vehicle Info“.
  3. Scroll to where the “Oil Life” is selected.
  4. Press and hold the “OK” button until the Oil Life is reset to 100%.

2007 – 2017 Models

  1. With the engine off, turn the ignition switch to “On” without starting the engine.
  2. Slowly Press the gas pedal 3x within ten seconds.
  3. Turn the ignition switch to the “LOC” position.
  4. When you start the vehicle, the “Oil Change Required” light should no longer be lit.

FAQS

When should you reset your oil change life?

You want to reset your Wrangler’s oil life if you have changed your oil and the indicated light is still illuminated on your dash. The above steps will reset your oil life, turning off your oil change light indicator.

What should you do if it doesn’t work?

I hope this tutorial has helped you reset the engine oil notification on your Jeep Wrangler. If the steps didn’t work, try performing them again or take your vehicle to an authorized dealer to complete the oil reset.

1 thought on “How to Reset Oil Change Life on the Jeep Wrangler”

Leave a Comment