If you’ve ever wished for a warm car on a cold morning, remote start is your solution. Read on to learn more about the world of remote ignition, ensuring your Chrysler 300 is warmed up and ready to go when you are.
The Chrysler 300 has a remote start feature in model years 2008 and newer.
Contents
How to Enable Remote Start on Chrysler 300
While most Chryslers made from 2008 onward have the remote start feature built into the car computer, it’s usually disabled by default. You’ll first need to turn this setting on. Here’s how:
- Tap “More” on the main menu in your car’s infotainment system.
- Select “Settings.”
- Choose “Auto-On Comfort and Remote Start.”
- Check the box on the setting named “Auto-On Driver Heated/Vented Seat & Steering Wheel.”
- Optionally, check the “Sound Horn for Remote Start.”
With this setting, your car will immediately power up the driver’s side heating and ventilation to ensure your seat is comfortable when you get in. If you check the horn option, your car’s horn will blare after the remote start.
Chrysler 300 Remote Start via Key Fob
The remote start option is generally available on all vehicles that come with the key fob that has the remote start button on it. Still, you’ll need to turn on the climate control setting if you want to get heating and ventilation alongside it.
After you do that, the process is remarkably simple:
- Lock the vehicle using the lock button on your remote key fob.
- Press the remote start button, which looks like a circular arrow with “2x” inside it.
- Press the remote start button again and hold it for a bit.
- The engine will start, and exterior lights and LEDs (depending on the model) will flash to indicate successful activation.
Chrysler 300 Remote Start via App
Chrysler drivers can also use the Uconnect Access mobile app to create a digital key on their smartphone and send signals to their car over the internet. This removes the relatively short-range limit on standard key fobs. However, you’ll need an active Uconnect subscription to receive these benefits. Here’s what you’ll need to do:
- Download the Uconnect Access app from your platform’s app store.
- Open the app and connect your vehicle by following the on-screen instructions.
- Tap on the circular arrow icon to remotely start your vehicle.
- Enter the 4-digit PIN you used when creating your Uconnect account (if you haven’t already, you’ll need to register).
- Select “OK” to close the pop-up screen and confirm.
- You should receive a notification on whether the remote start was successful.
Chrysler 300 Remote Start via Website
You can also use the Mopar Owner Connect website to remotely start your car. This is a bit finicky on a mobile browser, but it’s an excellent option if you don’t want to download the app. Follow these steps:
- Go to the Mopar Owner Connect website and log in with your account credentials. If you don’t have an account, register one.
- Make sure that your vehicle is connected to your account. You may need to scan your car’s VIN located on the driver’s hand side of the door.
- Select the vehicle you want to start remotely from the list.
- Choose the circular arrow icon to start the car.
- You’ll need to enter the 4-digit security PIN and confirm your choice.
- The browser should display a pop-up message of the car’s remote start status.
As with the mobile app, the website remote start works over the internet. You’ll need to be subscribed for Uconnect access.
Can Remote Start Fail?
As with many vehicles, the remote start option on the Chrysler 300 has built-in restrictions to prevent accidents. These include:
- Your car must be locked, and the transmission set to park.
- All the windows and the trunk must be closed.
- The car won’t turn on if it doesn’t have enough fuel or battery power.
- The remote start lasts only 15 minutes if nobody enters the car by using the key.
- The engine will shut off if the brake is pressed while the key fob is outside the car.
When using the app or the website, your car needs to have a stable cellular network to be able to receive the signal over the internet.
FAQs
How do I turn off my car remotely?
You can only turn off your car remotely if you’ve used the remote start and nobody is currently driving the car. To do so, long-press the remote start button again.
Can someone drive off with the car when it’s remote started?
No. The car needs to detect the key fob inside to be able to switch from park to a different gear. Remote start simply allows you to preemptively start the car to use the climate control settings for comfort.