Are you ready to take charge of your car’s key fob? This article is your ultimate resource for learning how to program it like a pro with a Ford Fusion. Say hello to personalized access and goodbye to any programming worries.
Contents
2006 – 2020 Models
- Insert one of the existing working key fobs into the ignition.
- Turn the key from the “Off” to the “Run” position (do not start the engine) and cycle it back to “Off.” Do this quickly, within 5 seconds.
- Within 10 seconds of turning the key to “Off” in step 2, insert the second existing working key fob and turn it to the “Run” position (again, do not start the engine).
- Cycle the second key from “Off” to “Run” and back to “Off” within 5 seconds. You should hear a chime to indicate that the vehicle has entered programming mode.
- Take the new key fob you want to program and press any button on it within 8 seconds of hearing the chime.
- If you have multiple key fobs to program, repeat steps 3-5 for each of them within the 8-second window.
- Turn the ignition to the “Run” position. This should end the programming mode.
Troubleshooting Your Key Fob
If you’re having trouble with your Ford Fusion key fob, you can try a few things to troubleshoot the issue.Â
- Make sure that the battery is fully charged and installed correctly.
- Try reprogramming the key fob.
- Replace the key fob altogether. Contact your local Ford dealership or a trusted auto parts store to find a replacement fob compatible with your Fusion model.