GMC Sierra: How To Reset The Oil Light

Learn how to Reset the Oil Change Light in the GMC Sierra by following the uncomplicated steps below.

Tip: After each oil change and new filter, the maintenance oil light indicator should disappear automatically. However, if it does not, it will need resetting for effective performance. Additionally, this indicator is included to alert you if there is a problem with the vehicle’s oil and is NOT to be ignored! If the warning is not addressed, this can lead to other unexpected costly engine issues.

If you are unable to reset the oil change notification light on the first try, REPEAT the steps. If you are still unsuccessful, contact the dealership for assistance or consult your vehicle user’s manual. 

USING THE TRIP ODOMETER KNOB

1. With your vehicle in the ON position without starting the engine. 
2. Turn the TRIP ODOMETER knob until you reach OIL LIFE REMAINING.
3. Press IN and HOLD the knob until the OIL LIFE changes to 100 percent.
4. Turn the switch to OFF then back ON.

Warning light should be OFF!

*In some models, you can just press IN the knob to Reset the warning light.

---

WITHOUT STEERING WHEEL CONTROLS

1. With your vehicle in the ON position without starting the engine. 
2. Press IN the gas pedal Three times within 5 seconds. 
3. Turn the switch to OFF then back ON. 

Warning light should be OFF!

---

WITH STEERING WHEEL CONTROLS 

1. With your vehicle in the ON position without starting the engine. 
2. Located on the RIGHT side of the steering wheel, press the RIGHT arrow to INFO.
3. Press the CENTER checkmark to select.
4. Use the RIGHT arrow to locate OIL LIFE REMAINING.
5. Press the CENTER checkmark to select.
6. Press the RIGHT arrow to highlight RESET.
7. Press the CENTER checkmark to select.
8. You will be asked, ARE YOU SURE YOU WANT TO RESET?
9. Press the CENTER checkmark to select YES.
10. Switch the ignition OFF then back ON to verify the Reset.

Warning light should be OFF!