Chevy Impala: Reset Tire Pressure Monitoring System

Contents

Reset Tire Pressure Monitoring System

If you’ve filled your tires, but the pressure monitor is saying they’re low, it might be time to reset the tire pressure monitoring system of your Chevy Impala. Here’s how!

2013 – 2023 Models

  1. Turn the ignition to ACC.
  2. Press the TPMS RESET button until the TP light flashes three times.
  3. Turn on the car.
  4. Wait about 20 minutes for TPMS to refresh.

2006 – 2012 Models

  1. Turn the ignition to ON.
  2. Turn the headlight switch to Parking 3x in 5 seconds.
  3. Turn the ignition OFF.

2000 – 2005 Models

  1. Turn the ignition to ON.
  2. Turn the headlight switch to Parking 3x in 5 seconds.

OR

  1. Turn the ignition to ACC/ON with the radio off.
  2. Press and hold the DISP button for 5 seconds until SETTINGS appear.
  3. Press SEEK to locate FIND TIRE MON.
  4. Press PREV/NEXT to enter the submenu.
  5. RESET will appear.
  6. Press DISP to reset. You will hear and chime, and DONE will display for 1 second.
  7. Scroll to EXIT.
  8. Press DISP to exit.

NOTE: On extremely cold days, your low tire pressure light may falsely activate.


Check your Tire Pressure

Impala 2006 – 2012 models

First, look to the right of the steering wheel. Here you’ll find four buttons to interact with the display (aka the driver information center). The button images are kinda hard to describe, so I’ve given them special names (see the image below). Continue pressing the Information button until you see the tire pressure you’re interested in. All four are listed individually.

The tire pressure reading is automatically updated by your car. To turn off the low tire pressure light, simply inflate the low tire and drive a few blocks, and the light will turn off!

NOTE: Your low tire pressure light may falsely activate on extremely cold days. You shouldn’t be terribly worried if the light turns off after a few miles of driving.

2 thoughts on “Chevy Impala: Reset Tire Pressure Monitoring System”

  1. I have 2002 chevy impala ls 3.8l. it displays low tire pressure on the dash, tire pressures are correct. there is no tire monitor in the settings of the radio. how do I reset this with no tire monitor in the radio settings?

    Reply

Leave a Reply to Ricky A Lotzer Cancel reply