Buick Encore: Reset TPMS

The TPMS light located on your car’s dashboard gauge cluster typically comes on when your tire pressure is too high or too low. This guide will show you how to reset this gauge if you are struggling with resetting your Buick Encore’s TPMS.

You’ll require a TPMS Relearn Tool to reset TPMS in these Buick Encore models. You can purchase a TPMS relearn tool at a local auto accessories store or online.

Contents

2020 – 2022 Models

  1. Turn on the ignition but don’t start the engine.
  2. Use the car’s Select or navigation button to go to the Vehicle Tab menu.
  3. On the Tab menu, scroll to Tire Pressure Learn.
  4. Press and then hold the Tick button or thumbwheel to enter Relearn Mode.
  5. Wait for a confirmation message.
  6. Press the Tick button to confirm the Tire Learning Active message.
  7. Starting with the front tire on the driver’s side, place the relearn tool against the tire next to the valve stem. Press the button on your tool to turn on the sensor.
  8. Repeat the process for the other tires.
  9. After, you’ll hear a chirping sound from your vehicle to confirm a sensor reset.
  10. After resetting the last tire, turn off the ignition.
  11. The Tire Learning Active message will disappear.
  12. Adjust tire pressure to the recommended level.

2013 – 2019 Models

  1. Turn the ignition key on but don’t start the engine.
  2. On the turn signal lever, press the menu button several times until you see the Vehicle Information menu.
  3. On the menu, scroll down to Tire Pressure.
  4. Press and hold the CTR/SET button to enter relearn mode.
  5. A confirmation message will appear on your screen.
  6. Press the SET/CTR button to confirm.
  7. Use the TPMS Relearn tool to start the TPMS sensor.
  8. Starting with the front tire on the driver’s side, place the relearn tool against the tire next to the valve stem.
  9. Repeat the process for other tires.
  10. After, you’ll hear a chirping sound from your vehicle to confirm a sensor reset.
  11. After resetting the last tire, turn off the ignition.
  12. The Tire Learning Active message will disappear.
  13. Adjust tire pressure to the recommended level.

Was this helpful?

Thanks for your feedback!

Leave a Comment