How to Reset Oil Change Light on Chrysler Pacifica

After having maintenance performed on your, you may need to reset the ‘Oil Change Required‘ notification. You can reset the oil change light using these steps.

2009 – 2023 Models

1. With the engine off, turn the ignition switch to the “On” position without starting the engine.
2. Within a 10-second interval, push the accelerator pedal all the way down slowly three times within 10 seconds.
3. Turn the ignition switch to the “LOC” position.

Models with Instrument Cluster Display

An alternate method is using the instrument cluster display.

1. With the engine off, turn the ignition switch to “On” without starting the engine.
2. Use the buttons on the steering wheel to select “OK,“ then use the arrows to toggle the selection to “Vehicle Info. “
3. Scroll to where the “Oil Life” is selected.
4. Press and hold the “OK” button until the Oil Life is reset to 100%

2005 – 2008 Models

1. Turn the car On.
2. Press the Menu button until “Reset Service Distance? No” appears.
3. Press the Step button (located at the top left of the instrument cluster) to change the “No” to “Yes.”
4. Press Reset.
5. Turn the car off.

Each time the ‘Oil Change Required’ light is reset on the Chrysler Pacifica, it will illuminate again after about 3,500 miles to remind you to have maintenance performed on the vehicle.

I hope that these instructions helped you successfully reset the oil light for the Chrysler Pacifica. Let me know about your experience in the comments section below.

Related posts:

How to Open Fuel Door on the Chrysler Pacifica Chrysler Pacifica: Reset TPMS Chrysler Pacifica: How to Set The Clock