Dodge Challenger: How to Reset TPMS

A car has many essential parts, but none as important as the tires. It doesn’t matter how well the car works if the tires are no good. That is why many cars nowadays have a Tire Pressure Monitoring System or TPMS. This system warns you when a tire is low on air, a sensor has gone bad, or there is a malfunction in the system.

Below are directions for resetting the TPMS on a Dodge Challenger.

2008 – 2023 Models

Low Tire Pressure

1. When the Tire Pressure Monitoring System warning turns on, check which tire is low with a Pressure Gauge.
2. Inflate the low tire until it is at the recommended PSI.
3. Drive the vehicle for 20 minutes above 15 mph. The TPMS system will reset automatically.

New or Repaired Tire

1. Place the new or repaired tire(s) on the vehicle.
2. Make sure the tire is at the recommended PSI.
3. Drive the vehicle for 20 minutes above 15 mph. The TPMS system will reset automatically.

Note: If this does not reset the system, you should take it to a certified mechanic or dealership.