The Mazda CX-5 will display a wrench on the instrument panel when an oil change is due. You can clear this notification after maintenance service has been performed using these steps.
2018-2021 Models
- Starting from the Home screen, select the “Applications” icon.
- Select “Vehicle Status Monitor.”
- Select “Maintenance.”
- Select “Oil Change.”
- Select “Reset.”
2012-2017 Models
- Turn the ignition switch to the “on” position without starting the engine.
- Press and hold the “Trip” button on the dashboard until the odometer displays the trip meter.
- Turn the ignition switch to the “off” position.
- Press and hold the “Trip” button again, then turn the ignition switch to the “on” position.
- Continue holding the “Trip” button until the maintenance notification appears on the dashboard.
- Release the “Trip” button.
- Press and hold it again until the maintenance notification starts flashing.
- Release the “Trip” button, then press it again quickly to reset the maintenance notification.
That’s it! After performing these steps on the Maxda CX-5, the oil change reset light should now be cleared.
FAQS
How often should I reset the oil light on my Mazda CX-5?
You should reset the oil light on your Mazda CX-5 after each oil change. This ensures that the oil change interval is accurately tracked and that the oil life percentage is reset to 100%.
Why is the oil light still on after resetting it on my Mazda CX-5?
If the oil light remains on after resetting it, there might be an issue with the oil pressure or oil level in your vehicle. Check the oil level using the dipstick and add oil as needed. If the oil level is fine, have your vehicle inspected by a qualified mechanic.
Can I reset the oil light without changing the oil on my Mazda CX-5?
You should not reset the oil light without changing the oil. The oil light serves as a reminder to change the oil at the recommended intervals. Ignoring the oil change reminder can lead to potential engine damage, decreased fuel efficiency, and compromised performance.
On 2021 CX-5 there is no “Applications”. Tap “Information” instead.
Then “Vehicle Status Monitor“ then “Vehicle Maintenance Settings”
Then “Reset Service Interval” then “Reset”