If you’ve never driven a Toyota RAV4 before, it can be confusing to set the clock for the first time. Setting the clock in your RAV4 is required after disconnecting the battery, and for some models, if you travel to a different time zone. But the instructions are easier than you’d think. Use the steps below to change the time.
Choose the OPTION which suits your vehicle below, and reset your clock:
2010 – 2023 Models
OPTION 1
- Turn the key to the ON position (DO NOT start the ignition).
- Press and HOLD the H button located right under or next to the numbers on the clock display to adjust the HOUR.
- Press and HOLD the M button to adjust the MINUTES.
*Once you have selected the chosen time, YOU ARE ALL SET!
OPTION 2 (Navigation Screen)
- Turn the key to the ON position (DO NOT start the ignition).
- On the HOME screen, tap on the TIME itself to adjust the clock.
- Use the up and down arrows to set the HOUR.
- Use the up and down arrows to set the MINUTES.
*Once you have selected the desired time, tap the OK button at the bottom of the screen to finalize the time.
1995 – 2009 Models (Without Navigation Screen)
- Turn the key to the ON position without starting the ignition.
- Press and hold the H button located under or next to the numbers on the clock display to adjust the hour.
- Press and hold the M button located under or next to the numbers on the clock display to adjust the minutes.
Additional Tips
Tip 1: For vehicles with digital navigation screens: *Turning on the GPS TIME will allow the system to automatically adjust your time dependent on your present location. This feature will change your clock when you cross into a different time zone.
Tip 2: If you are unable to set the Time on the first try, repeat the steps. If you are still unsuccessful, contact the dealership for assistance or consult your vehicle user’s manual.
